RT | <P=001> |
|
ENTERING YOUR NAME AND FAX NUMBER
To have your name and fax/telephone number (called the "Sender’s name" and "Sender’s number") printed at the top of every page you transmit, program them by pressing the panel keys as shown below.
♦You must program your name and fax number in order to comply with the Consumer Protection Act of 1991 (see inside of front cover).
♦If you enter an incorrect number or letter, flip the Rapid Key overlay up (if it is down), press the "←" key to move the cursor back to the mistake, and then enter the correct number or letter. (To move the cursor forward, press the "→" key.)
Note: The fax will not respond if you press the FUNCTION key while the display shows the telephone line status. Before performing any operations requiring the FUNCTION key, make sure the display shows the date and time (press the CHANGEOVER key to switch between the telephone line status and the date and time).
Step Press these keys: |
| Comments | ||||
1 | FUNCTION | 3 |
|
| ||
|
|
| "ENTRY MODE" will appear in the display. | |||
|
|
|
|
| "OWN PASSCODE SET" will appear in the | |
|
|
|
|
| display. Note that instead of pressing "3", you | |
2 |
| 3 |
|
| can press "#" or "*" to scroll through the | |
|
|
|
|
| settings in ENTRY MODE until "OWN | |
|
|
|
|
| PASSCODE SET" appears, and then press the | |
|
|
|
|
| START key to select it. | |
5 | 3 | 1 2 | 3 | 4 5 | Enter your fax number (max. of 20 digits) by | |
pressing the numeric keys. (To insert a space | ||||||
3 |
|
|
|
| between digits, press the "#" key. To insert a "+", | |
|
|
|
| (Example) | ||
|
|
|
| * | ||
|
|
|
|
| press the " " key.) | |
|
| START |
|
|
| |
4 |
|
|
|
|
| |
S | H | A | R | P | Flip the Rapid Key overlay down (if it is up), and | |
enter your name by pressing the appropriate | ||||||
5 |
|
|
|
| ||
|
|
|
| keys as shown on the following page. | ||
|
| (Example: "SHARP") | ||||
|
| (Maximum of 24 characters.) | ||||
|
| START |
|
|
| |
6 |
|
|
|
|
| |
| STOP | STOP |
|
|
| |
7 |
|
|
|
| Press the STOP key twice to return to the date | |
|
|
|
| and time display. | ||
|
|
|
|
|
INITIAL SETTINGS |