YF | <P=001> |
|
TIMER OPERATIONS
The Timer function allows you to set an operation to be performed automatically at a time you specify. Up to 48 operations can be set at any one time, and the time of each can be set up to a week in advance.
You can use this function to take advantage of lower nighttime rates without having to be there when the operation is performed.
Note: The DOCUMENT key cannot be used for a timer transmission.
Initial procedure
To set a timer operation, first perform the following procedure. After you have completed it, go to the procedure for the specific operation you want to set (see the following pages).
♦Code numbers are used to specify days of the week. Refer to the table below when making time settings which include a specified day:
Day | SUN | MON | TUE | WED | THU | FRI | SAT |
|
|
|
|
|
|
|
|
Code | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|
|
|
|
|
|
|
|
Step | Press these keys: | Comments |
1 | TIMER | TIMER MODE will appear in the display. |
T |
2 | 1 | Select SET. |
Press the appropriate key one or more times as shown below to select the type of operation.
∙ Transmission
∙ Confidential transmission
3 | ∙ Polling |
|
∙ Serial Polling
∙ Broadcasting
∙ Relay Request
START
4
SPECIAL FUNCTIONS |