BKM-10R Monitor Control Unit (Optional)

This manual explains the location and function of parts and controls of the optional BKM-10R Monitor Control Unit. The explanation applies to the optional BKM-11R Monitor Control Unit.

Note

If you press the UP/DOWN buttons or ENTER button on the Monitor Control Unit quickly and repeatedly, it may cause the monitor to go out of control. In this case, turn the PHASE, CHROMA or another MANUAL adjustment knob to restore control.

Overview 1 Chapter

1 Monitor memory card insertion slot

 

5 POWER switch

 

6 DEGAUSS button

 

7 DISPLAY UNIT

 

connector (rear)

2 SHIFT button

 

3 Function buttons

8 Numeric keypad

4 Menu operation

9 MANUAL adjustment

buttons

buttons and knobs

1Monitor memory card insertion slot

Insert the BKM-12Y Monitor Memory Card (optional).

4Menu operation buttons

For inserting/ejecting the monitor memory card, see page 20.

2SHIFT button

Press to select one of the two functions designated to the function buttons 3.

Each time the SHIFT button is pressed, the LED turns on (SHIFT ON: lit in amber) and off (SHIFT OFF). SHIFT OFF: The functions indicated above the

UP MENU

DOWN ENTER

MENU button: Press to display the monitor menus.

UP/DOWN buttons: Press to select the items and setting values.

ENTER button: Press to confirm the items and values entered (Ent button on the numeric keypad 8 has the same function).

function buttons can be used (the LED of the function button lits in green).

SHIFT ON: The functions indicated below the function buttons can be used (the LED of the function button lits in amber).

3Function buttons

Change the operation conditions for the monitor. Each time the button is pressed, the LED turns on and turns off, and the operation conditions are changed. Each button has two functions. Select one of the two functions by pressing the SHIFT button 2. When the SHIFT button is set to ON, the LED lights in amber, and when the SHIFT button is set to OFF, the LED of each button lights in green.

For the functions of the function buttons in case of SHIFT OFF and SHIFT ON, see pages 17 and 18.

For more information about menu operation, see “Basic Menu Operations” on page 22.

5POWER switch

Press to turn on/off the monitor. By setting with the ADDRESS menu, it is possible to turn on/off the power of the specified monitors only, or of all monitors at the same time.

Note

When the monitor is turned on, “INITIALIZING” is displayed. While it is displayed, the monitor cannot accept commands from the BKM-10R/11R Monitor Control Unit or the equipment connected to the serial REMOTE 1 connector.

For information about the ADDRESS menu, see “Selecting the Monitor to Control — ADDRESS Menu” on page 60.

(continued)

15