Menu Structure

Menus consist of two to six levels. The Main Menus

Detailed information on the levels of menus is

displayed on the Menu List and Level 1 are shown

described at the top of explanation of each menu.

below.

 

 

 

 

 

Main Menu

Level 1

Functions

 

 

 

CONTROL PRESET ADJ A

 

 

 

 

 

PRESET [A1]

 

 

 

 

 

COLOR TEMP ADJ B

 

 

 

 

 

 

CH SET [A1]

 

 

 

 

 

 

 

 

 

STD [B1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COL1 [B2]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COL2 [B3]

 

 

 

 

 

 

 

 

 

SET UP C

 

 

 

 

 

 

 

 

CH SET [B4]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT CONFIGURATION [C1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE [C2]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PASSWORD [C3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM CONFIGURATION [C4]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON SCREEN SET [C5]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ALIGNMENT [C6]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHITE UNIFORMITY [C7]

 

 

 

 

 

 

 

 

 

MEMORY CARD D

 

 

 

 

 

 

 

EXTEND MENU [C8]

 

 

 

 

 

 

 

 

 

 

 

SAVE [D1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LOAD [D2]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DELETE [D3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FORMAT [D4]

 

 

 

 

 

 

 

 

 

Sets the preset values for the input signal contrast, brightness, chroma, and phase. (page 28)

Sets the color temperature. (page 30)

A menu group for performing monitor setup, consisting of the following.

Sets the input channel. (page 35)

Sets the remote control functionality. (page 40)

Sets passwords for menus. (page 42)

Sets the input channel selection method, power-up conditions and decoder. (page 44)

Sets data about the screen display. (page 46)

Adjusts the screen convergence, and geometry. (page 48)

Adjusts the beam landing and color uniformity of the CRT (BVM-D24E1WU/D24E1WE/ D24E1WA/D32E1WU/D32E1WE/D32E1WA only). (page 51)

Loads the factory default data for the board installed. (page 55)

Operates on data in the memory card. (page 57)

Menu 2 Chapter

COPY FROM E

 

 

 

MONITOR ADDRESS [E1]

 

 

 

STATUS F

 

 

 

 

STATUS (1/3) [F1]

 

 

 

 

 

 

 

 

 

STATUS (2/3) [F2]

 

 

 

 

 

KEY PROTECT G

 

 

STATUS (3/3) [F3]

 

 

 

 

 

Copies set-up data from other connected monitors. (page 58)

Displays the information about the monitor or options installed in the monitor. (page 59)

When set to ON, function buttons on the control unit (with the exception of menu operation buttons) will be disable. When set to OFF, key protection is removed.

27