[E]Monitor-to-Monitor Data Copy

—COPY FROM Menu

Overview

Menu 2 Chapter

When multiple BVM-DxxE/DxxF series monitors are connected via their serial remote ports, data can be shared between the monitors by data copy. The data copy from one monitor to another is accomplished with the COPY menu.

Note

Data copy is impossible between monitors other than BVM-DxxE/DxxF series.

First assign the MONITOR ADDRESS from which the data is to copy, then select the data from among the following:

•Copying data for all menu settings (ALL menu)

•Copying data for the CONTROL PRESET ADJ menu settings (CONTROL PRESET menu)

•Copying data for the COLOR TEMP ADJ menu settings (COLOR TEMP menu)

•Copying data for the SET UP menu settings (SET UP menu)

Structure of the COPY FROM Menu

Main Menu

Level 1

Level 2

COPY FROM E MONITOR ADDRESS E1 ALL

CONTROL PRESET

CONTROL TEMP

SET UP

Setting Lists of the COPY FROM Menu

This section explains the setting lists displayed in the menu.

How to read the setting lists

•For purposes of explanation, each setting list is preceded by a menu number. These numbers are not displayed on the screen.

For more information about the menu number, see “About menu numbers” on page 23.

•The arrow mark (÷) refers you to another setting list that appears after you make the setting, or to an operation that is carried out as a result of the setting. When there is no arrow mark, the menu does not have any sub-list.

[E]COPY FROM menu

Select the copy source monitor.

MONITOR ADDRESS: Enter the monitor address number. ÷[E1]

[E1] MONITOR ADDRESS menu

Select the data to be copied. ÷Copy is carried out. ALL: Copy data for all menu settings.

CONTROL PRESET: Copy the data for the CONTROL PRESET ADJ menu settings.

COLOR TEMP: Copy the data for the COLOR TEMP ADJ menu settings.

SET UP: Copy the data for the SET UP menu settings.

58