Overview 1 Chapter

Location and Function of Parts

Function buttons in SHIFT ON mode (LEDs of function buttons in amber)

16:9 button: When this button is pushed in (ON), the aspect ratio changes to 16:9, and when set to OFF, the aspect ratio changes to 4:3.

The aspect ratio is fixed to 16:9 when the signal of some signal formats is input. For details, see “Available Signal Formats” on page 65.

SYNC button: When this button is pushed in (ON), the monitor synchronizes to the sync signal input to the SYNC connectors on the rear panel (EXT SYNC). When set to OFF, it synchronizes to the sync signal included in the signals being monitored (INT SYNC).

MONO APT COMB F1

F2 ADDRESS

16 : 9

SYNC

BLUE

R

G

B

F3

F4

SAFE

ONLY

AREA

 

 

 

 

 

 

 

Notes

•When INT SYNC is selected, use a component or YC signals including a sync signal on the Y signal, and use GBR signal including a sync signal on the G signal.

•To monitor serial digital signals, always select INT SYNC.

BLUE ONLY button: When this button is pushed in (ON), red and green signals are cut, and only the blue signal is displayed as a monochrome picture. It makes it easy to adjust CHROMA and to check VTR noise.

R/G/B buttons: When these buttons are pushed in (ON), R(red), G(green), and B(blue) beams are cut respectively.

SAFE AREA button: When this button is pushed in (ON), a safe area is displayed on the screen.

Note

When EXT SYNC is selected, the safe area display possibly may not be shown in the correct position.

F3/F4 buttons: For future expansion.

18