Cancelling the Remote ControlMode

To cancel the remote control mode, press the ADDRESS button.

Exiting the ADDRESS Menu

To exit the ADDRESS menu, press the ADDRESS button or the MENU button.

Short-cut Function in the

ADDRESS Menu

When selecting the monitor, short-cut function will enable to select the target monitor without using the items in the ADDRESS menu. The operation procedure is as follows.

To select the monitor in the SINGLE mode

1 Press the ADDRESS button.

2 Press the address number of the target monitor. Press one digit address number on the numeric keypad when it is from 1 to 9.

Press three digits address number (press 0 button and then press the two-digit address number) when it is from 10 to 99.

To select the monitors in the GROUP mode

1 Press the ADDRESS button.

2 Press the F1 button.

3 Press the group number of the target monitor. Press one digit group address number when it is from 1 to 9.

Press three digits group address number (press 0 button and then press the two-digit group number) when it is from 10 to 99.

To select all the monitors in the ALL mode

1 Press the ADDRESS button.

2 Press the F2 button.

Menu 2 Chapter

61