Selecting the Monitor to Control
— ADDRESS Menu
Menu 2 Chapter
Overview
When multiple monitors are connected by a serial remote connection, the ADDRESS menu is used to choose whether one particular monitor or monitor group will be controlled, or whether operations are to be performed on all monitors together.
Displaying the ADDRESS MenuPress the ADDRESS button.
The ADDRESS menu is displayed on the screen.
Settings made with the menu items are as follows:
By pressing the ENTER or Ent button after selecting the item, serial remote operation becomes activated.
Address number selected with the
Address
|
|
|
|
|
|
A D D R E S S |
| ||||
|
| - - - | |||
S I N G L E |
|
|
| * * * | |
G R O U P | * * * | ||||
A L L | |||||
|
| ||||
A L L P O W E R O N | |||||
A L L P O W E R O F F | |||||
|
| ||||
D I S P L A Y M O N I T O R DA D R E S S |
| ||||
D I S P L A Y G R O U P A D RD E S S |
|
| |||
|
|
|
| ||
|
|
|
|
|
|
ADDRESS Menu
Item | Function |
|
|
SINGLE | Controls only a specified monitor. Enter the monitor address number. |
|
|
GROUP | Controls only a specified monitor group. Enter the group address number. |
|
|
ALL | Controls all monitors. |
|
|
ALL POWER ON | Turns all connected monitors on. |
|
|
ALL POWER OFF | Turns all connected monitors off. |
|
|
DISPLAY MONITOR ADDRESS | When this item is selected, each connected monitor displays its monitor address on its |
| screen. |
|
|
DISPLAY GROUP ADDRESS | When this item is selected, each connected monitor displays its group address on its screen. |
|
|
Notes
•To remotely control monitors connected in serial, MONITOR ADDRESS or GROUP ADDRESS of monitors should be correctly set in the REMOTE menu.
For details of the REMOTE menu, see “ [C2] Assigning the Remote Control Functions (SET UP 2) – REMOTE Menu” on page 40.
–In GROUP mode, when the KEY PROTECT function is set to ON, the LED on the pressed function button lights, but it is deactivated. (LED of other monitors in the same group will not light.)
–In GROUP or ALL mode, the LEDs of the function buttons will not light with controlled from the menu. (LEDs light only when you press the function button.)
–In GROUP or ALL mode, LEDs of controlled monitor will light as follows.
(1)In case of SHIFT OFF before remote control operation: LEDs light in green when the SHIFT button is remotely set to OFF.
(2)In case of SHIFT ON before remote control operation: LEDs light in amber when the SHIFT button is remotely set to ON.
For details, see “SHIFT button” on page 15.
•In SINGLE mode, when the data is saved or loaded in or from the memory card, the error message may appear due to data communication error. In such a case, clear the remote mode, then try again.
It is recommended to save or load data to or from the memory card by controlling the monitor from the
60