[C6] ALIGNMENT menu (1/3)
Adjust the position or size of the picture with the UP and DOWN buttons or PHASE knob. ROTATION: Compensates for the screen rotation
which occurs when the monitor is installed facing north or south.
H PHASE: Adjust the horizontal picture position.
V CENTER: Adjust the vertical picture position.
H SIZE: Adjust the width of the picture.
V SIZE: Adjust the height of the picture.
VITS BLK: Adjust vertical blanking so that VITS signals are not visible in the upper part of the screen.
SUB CONTRAST: Adjust the center value of the contrast when the image size or signal format is changed.
[C6] ALIGNMENT menu (2/3)
Adjust the geometry of the picture with the UP and DOWN buttons or PHASE knob.
H PIN: Correct side pincushion distortion.
H PIN BAL: Correct the balance of side pincushion distortion.
H CORNER PIN: Correct pincushion distortion at the sides of the picture.
H CORNER S: Correct S pincushion distortion at the sides of the picture.
H KEY: Correct trapezoid distortion.
H KEY BAL: Correct the balance of trapezoid distortion.
[C6] ALIGNMENT menu (3/3)
Adjust the convergence with the UP and DOWN buttons or PHASE knob.
V STATIC CONV: Adjust vertical static convergence on the whole screen.
V CONV TOP: Adjust vertical convergence at the top of the screen.
V CONV BOT: Adjust vertical convergence at the bottom of the screen.
H STATIC CONV: Adjust horizontal static convergence on the whole screen.
CONV FINE ADJUST... : Adjust the convergence finely at each adjustment point on the screen. ÷[C61]
D32E1WA only)
Menu 2 Chapter
49