Types of trouble and their solutions
In the recording and playback modes
Symptom | Cause and/or Corrective Actions |
The power does not turn on. | • The battery pack is not installed, or is dead or nearly dead. |
| c Install a charged battery pack. (p. 17, 18) |
| • The AC power adaptor is not connected to a wall socket. |
| c Connect the AC power adaptor to a wall socket. (p. 23) |
The end search function does not | • The tape was ejected after recording when using a tape |
work. | without cassette memory. (p. 39) |
| • You have not recorded on the new cassette yet. (p. 39) |
The end search function does not | • The tape has a blank portion in the beginning or middle. |
work correctly. |
|
The battery pack is quickly | • The operating temperature is too low. |
discharged. | • The battery pack is not fully charged. |
| c Charge the battery pack again. (p. 18) |
| • The battery pack is completely dead, and cannot be |
| recharged. |
| c Replace with a new battery pack. (p. 17) |
The battery remaining indicator does • You have used the battery pack in an extremely hot or
not indicate the correct time. | cold environment for a long time. |
| • The battery pack is completely dead, and cannot be |
| recharged. |
| c Replace with a new battery pack. (p. 17) |
| • The battery is not fully charged. |
| c Charge the battery pack fully again. (p. 18) |
| • A deviation has occured in the remaining battery time. |
| c Charge the battery fully. (p. 18) |
The power goes off although the | • A deviation has occured in the remaining battery time. |
battery remaining indicator indicates | c Charge the battery pack fully again so that the indication |
that the battery pack has enough | on the battery remaining indicator is correct. (p. 18) |
power to operate. |
|
|
|
The cassette cannot be removed from | • The power source is disconnected. |
the holder. | c Connect it firmly. (p. 17) |
| • The battery is dead. |
| c Use a charged battery pack. (p. 18) |
The %and Z indicators flash and no | • Moisture condensation has occurred. |
functions except for cassette ejection | c Remove the cassette and leave your camcorder for at |
work. | least one hour to acclimatize. (p. 211) |
indicator does not appear when | • The |
using a tape with cassette memory. | c Clean the |
Remaining tape indicator is not | • The qREMAIN is set to AUTO in the menu settings. |
displayed. | c Set it to ON to always display the remaining tape |
| indicator. (p. 121) |
| (Continued on the following page) |
неисправностей устранение и Поиск Troubleshooting
187