8-2 Basic Setup Menu
8-2-1 Items in the Basic Setup Menu
The basic menu items (excluding the items related to the digital hours meter) are listed in the following table.
•Item names are the names which appear on an external monitor, when the input signals to the monitor are the video signals output from the VIDEO OUT 2 (SUPER)/ SDI OUT 2 (SUPER) connector.
•An abbreviated name appears in the time data display section when you press the NEXT button.
•The values in the Settings column are the values which appear in the time data display section. (The values may appear in a different format on an external monitor. In this case, the external monitor values are shown in parentheses.) Underlined values are the factory defaults.
Menus 8 Chapter
Item number | Item name | Settings | ||
|
|
| ||
001 | PREROLL TIME | 0 s (0 sec)... 5 s (5 sec)... 30 s (30 sec): Set the preroll time to between 0 | ||
|
|
|
|
|
|
| and 30 seconds in steps of 1 second. | ||
|
| A preroll time of at least 5 seconds is recommended when using this | ||
|
| unit for editing. | ||
|
|
| ||
002 | CHARACTER | Adjust the horizontal screen position (as a hexadecimal value) of the text | ||
|
| information output from the VIDEO OUT 2 (SUPER) connector and SDI | ||
|
| OUT 2 (SUPER) connector for superimposed display on the monitor. | ||
|
| 00... 0A ...2A (525(U)/525(J) line modes) /00... 09 ...29 (625 line mode): | ||
|
| The hexadecimal value 00 is for the far left of the screen. Increasing the | ||
|
| value moves the position of the characters to the right. | ||
|
| Set this item by adjusting to the required position while viewing the monitor. | ||
|
|
| ||
003 | CHARACTER | Adjust the vertical screen position (as a hexadecimal value) of the text | ||
|
| information output from the VIDEO OUT 2 (SUPER) connector and SDI | ||
|
| OUT 2 (SUPER) connector for superimposed display on the monitor. | ||
|
| 00... 2E ...38 (525(U)/525(J) line modes)/00... 37 ...43 (625 line mode): | ||
|
| The hexadecimal value 00 is for the top of the screen. Increasing the | ||
|
| value lowers the position of the characters. | ||
|
| Set this item by adjusting to the required position while viewing the monitor. | ||
|
|
| ||
005 | DISPLAY INFORMATION | Determine the kind of text information to be output from the VIDEO OUT 2 | ||
| SELECT | (SUPER) connector and SDI OUT 2 (SUPER) connector. | ||
|
| off (display off): Do not output text information. | ||
|
| T&sta (time data & status): Time data and the units status. | ||
|
| T&UB (time data & UB): Time data and user bit data. (When UB (user bit | ||
|
| data) is selected with the COUNTER SELECT button, the user bit data | ||
|
| and time data arranged in that order are displayed.) | ||
|
| T&CNT (time data & CNT): Time data and counter count. (When | ||
|
| COUNTER is selected with the COUNTER SELECT button, the counter | ||
|
| count and time data arranged in that order are displayed.) | ||
|
| T&T (time data & time data): Time data and time code (TC or VITC). | ||
|
| T&clp (time data & clip name): Time code and clip name | ||
|
| time (time data only): Time data only. | ||
|
|
| ||
006 | LOCAL FUNCTION ENABLE | Determine which recording and playback control buttons on the control | ||
|
| panel are enabled when this unit is controlled from external equipment. | ||
|
| dis (all disable): All buttons and switches are disabled. | ||
|
| st&ej (stop & eject): Only the STOP button and EJECT button are enabled. | ||
|
| ena (all enable): All buttons and switches are enabled. | ||
|
|
| ||
007 | TAPE TIMER DISPLAY | Determine whether to display the counter in | ||
|
| + | ||
|
| 24H: | ||
|
|
|
|
|
102