3Audio level adjustment section

ALL indicator

ALL/CH-1 CH-2 CH-3 CH-4

VARIABLE

REC

PRESET

PB

2 ALL/CH-1, CH-2 to CH-4 adjustment knobs

1 VARIABLE switch

aVARIABLE (audio level adjustment selector) switch

This selects which of the input audio and playback audio has the level adjusted by the ALL/CH-1, and CH-2 to CH- 4 adjustment knobs.

REC: Adjust the input audio levels. The playback audio levels are fixed at their preset values.

PRESET: Do not adjust the audio levels.

PB: Adjust the playback audio levels. The input audio levels are fixed at their preset values.

bALL/CH-1, CH-2 to CH-4 (audio level) adjustment

knobs

Depending on the setting of the VARIABLE switch, these adjust the input audio or playback audio levels of channels 1 to 4.

By the setting of extended menu item 131 “AUDIO VOLUME,” you can enable the ALL/CH-1 knob to simultaneously adjust all eight channels. When this simultaneous adjustment is enabled the ALL indicator lights.

4Recording and playback control section

1PREV button

2PLAY button

 

 

3 NEXT button

PHONES PREV

PLAY

NEXT STOP REC

TOP F REV

F FWD

END

4STOP button

5REC button

aPREV (previous) button

Press this button, turning it on, to show the first frame of the current clip. While the first frame of a clip is shown, pressing this button jumps to the beginning of the previous clip.

This button is also used together with other buttons for the following operations.

Reverse direction high-speed search: Hold down the PLAY button, and press this button. A high-speed search in the reverse direction is carried out.

Displaying the first frame of the first clip: Hold down the SHIFT button, and press this button.

bPLAY (playback) button

To start playback, press this button, turning it on.

cNEXT button

Press this button, turning it on, to jump to the next clip, and show the first frame.

This button is also used together with other buttons for the following operations.

Forward direction high-speed search: Hold down the PLAY button, and press this button. A high-speed search in the forward direction is carried out.

Displaying the last frame of the last clip: Hold down the

SHIFT button, and press this button.

dSTOP button

To stop recording or playback, press this button, turning it on. The frame at the stop point appears.

The unit enters standby off mode when you press this button with the SHIFT button held down. It returns from standby off mode to the original state when you press this button again with the SHIFT button held down. (The lit or unlit status of the STOP button does not change.)

This unit can automatically enter standby off mode whenever a specified time elapses in disc stop mode. For details, see the description of extended menu item 501 “STILL TIMER” (page 113).

eREC (record) button

To start recording, hold down this button, and press the PLAY button. The recording takes place on an unrecorded part of the disc.

To stop recording, press the STOP button. This creates a clip of the recorded portion.

Parts of Functions and Names 2 Chapter

2-1 Front Panel 23