7-4Recording Continuous Time Code With FAM and FTP Connections

When you are connected to the unit by FAM or FTP, you can create new clips with time code that is continuous with the time code of the last frame of the last clip on the disc. To record continuous time code, set extended menu item 626 “TC MODE” to “int regen,” and set extended menu item 629 “TC SELECT” to “tc.” Then proceed as follows.

Note

Continuous time code cannot be recorded if extended menu item 629 “TC SELECT” is set to “vitc.”

See 8-3-2 “Extended Menu Operations” (page 120) for more information about how to make extended menu settings.

FAM connection

Write clip files to the unit from the computer or other device that is connected to this unit.

FTP connection

Use the “STOR” command to transfer clip files from the computer that is connected to this unit.

If you issue the “SITE UMMD” command immediately before the “STOR” command, the original time code of the transferred file is recorded, regardless of the setting of extended menu item 626.

Operations File 7 Chapter

7-4 Recording Continuous Time Code With FAM and FTP Connections

99