Parts of Functions and Names 2 Chapter

ACHTUNG

Aus Sicherheitsgründen nicht mit einem Peripheriegerät- Anschluss verbinden, der zu starke Spannung für diese Buchse haben könnte. Folgen Sie den Anweisungen für diese Buchse.

eAUDIO MONITOR OUT connector (RCA-pin)This outputs an audio signal for monitoring.

The monitored channel is selected by the combination of the AUDIO MONITOR SEL button (see page 22) and MONITOR switch (see page 22).

1Analog audio signal inputs/outputs

1AUDIO IN 1/3, 2/4 connectors

2AUDIO OUT 1/3, 2/4 connectors

AUDIO IN

1/3

2/4 AUDIO OUT 1/3

2/4

aAUDIO IN (analog audio signal input) 1/3, 2/4 connectors (XLR 3-pin, female)

These input analog audio signals.

With the AUDIO INPUT SEL button (see page 22), you can select whether the signal input to connector 1/3 is assigned to audio channel 1or 3, and whether the signal input to connector 2/4 is assigned to audio channel 2 or 4. You can set the reference input level with the maintenance menu item “AUDIO CONFIG.” (Factory default setting: +4 dB)

For details of the maintenace menu, see 8-4 “Maintenance Menu” on page 124.

bAUDIO OUT (analog audio signal output) 1/3, 2/4 connectors (XLR 3-pin, male)

These output analog audio signals.

When the unit is shipped from the factory, the 1/3 connector is set to audio channel 1, and the 2/4 connector is set to audio channel 2. You can change these settings with extended menu item 824 “ANALOG LINE OUTPUT SELECT.”

You can set the output level with the maintenance menu item “AUDIO CONFIG.” (Factory default setting: +4 dB) Non-audio signals are muted.

See 8-3-2 “Extended Menu Operations” (page 120) for more information about how to make these settings.

For details of the maintenace menu, see 8-4 “Maintenance Menu” on page 124.

2Digital audio signal inputs/outputs

1DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4 connectors

2DIGITAL AUDIO (AES/EBU) OUT 1/2, 3/4 connectors

DIGITAL AUDIO (AES/EBU)

IN

1/2

3/4 OUT 1/2

3/4

aDIGITAL AUDIO (AES/EBU) IN (digital audio input) 1/2, 3/4 connectors (BNC type)

These input AES/EBU format digital audio signals. The left connector (1/2) corresponds to audio channels 1 and 2, and the right connector (3/4) corresponds to audio channels 3 and 4.

bDIGITAL AUDIO (AES/EBU) OUT (digital audio

output) 1/2, 3/4 connectors (BNC type)

These output AES/EBU format digital audio signals. When the unit is shipped from the factory, the 1/2 connector is set to audio channel 1/2, and the 3/4 connector is set to audio channel 3/4. You can change these settings with extended menu item 827 “AES/EBU AUDIO OUTPUT SELECT.”

To treat the input and output signals of these connectors as non-audio signals, set the maintenance menu item “AUDIO CONFIG”-“NON-AUDIO INPUT” (recording) and extended menu item 823 “NON-AUDIO FLAG PB” (playback).

See 8-3-2 “Extended Menu Operations” (page 120) for more information about how to make extended menu settings.

See 8-4-2 “Maintenance Menu Operations” (page 126) for more information about how to make maintenance menu settings.

3Analog video signal inputs/outputs

1VIDEO IN connectors

2VIDEO OUT 1, 2 (SUPER) connectors

VIDEO IN VIDEO OUT

 

1

2

(SUPER)

28 2-2 Rear Panel