Sony PDW-1500 manual 140

Troubleshooting and Maintenance 9 Chapter

Message in time	Display	Description	Action
data display	condition a)
Non AV Full	on, limit, off	An attempt was made to record, display	Insert a different disc with enough free
		an E-E picture, record an essence mark,	capacity.
		or add a quick scene selection sub clip
		when there was no free Non-Real-Time
		space.
Index File! b)	on, limit, off	An attempt was made to record to a disc	Exchange the disc for one that contains an
		containing an unsupported index file.	index file supported by this unit.
			Alternatively, format the disc (see page
			47).
File System b)	on, limit, off	An attempt was made to record to a disc	It may be possible to play back the disc, but
		with an unsupported file system.	recording is not possible. Exchange the
			disc for one formatted in a file system
File System b)	on, limit, off	An attempt was made to record to a disc
			supported by this unit. Alternatively, format
		when its file system was set to inhibit	the disc (see page 47).
		recording.

a)With respect to setting of basic menu item 016

b)This appears from firmware version 1.4.

During reception of commands from an external device connected to the REMOTE connector

Message in time	Display	Description	Action
data display	condition a)
No Disc!	on	A recording, playback, search, or other	Try the operation again after loading a disc.
		command was received with no disc
		loaded.
REC INHI.!	on	A recording, E-E display, or edit preset	Try the operation again after setting the
		command was received for a write-	Write Inhibit tab to the recording enabled
		protected disc.	position.
REC INHI.!	on	A recording, E-E display, or edit preset	Try the operation again after setting
		command was received with extended	extended menu item 310 to “off.”
		menu item 310 “REC INHIBIT” set to	See 8-3-2 “Extended Menu Operations”
		“on.”
			(page 120) about how to make this setting.
IMX50 Clip	on, limit	A recording, E-E display, or edit preset	Try the operation again after changing the
IMX40 Clip		command was received with basic menu	setting of basic menu item 031.
IMX30 Clip		item for a disc recorded in a format	See 8-2-2 “Basic Menu Operations” (page
DVCAM Clip		different from the specification of basic
4CHx24 Clip		menu item 031 “RECORDING	105) about how to change this setting.
8CHx16 Clip		FORMAT.”
Run Salvage	on, limit	A recording, E-E display, or edit preset	Try the operation again after recovering
		command was received for a disc that	clips from the disc (salvage function).
		needs clip recovery (salvage).	See 3-5-7 “Handling of Discs When
			Recording Does Not End Normally
			(Salvage Function)” (page 47).
i.LINK!	on, limit	An edit preset command was received	To perform this operation, use the VIDEO
		with an input signal from the S400	INPUT SEL button to select a signal other
		(i.LINK) connector selected.	than “i.LINK.”

140 9-3 Alarms