Sony PDW-1500 manual 141

Message in time	Display	Description	Action
data display	condition a)
MAX # Files	on, limit, off	The number of files on the disc had	Exchange the disc for one with enough
		reached the upper limit (5000), or there	free capacity.
		was not enough capacity in the General
		directory when a command was
		received to record, display an E-E
		picture, record an essence mark, or add
		a quick scene selection sub clip.
Disc Full!	on, limit, off	A command was received to record or
		display an E-E picture when there was
		not enough free capacity on the disc, or
		when the number of recorded clips had
		reached the upper limit (300).
MAX# SB CLP	on, limit, off	A command was received to add a sub	These operations are not possible.
		clip when the number of registered sub
		clips had already reached the upper limit
		(300) of the specifications of this unit.
CL OVER DUR	on, limit, off	A command was received to add a sub
		clip when the total duration of sub clips
		in the clip list had already reached the
		upper limit (24 hours) of the
		specifications of this unit.
Disc Damage	on, limit, off	A command was received to record,	This disc cannot be recorded. Exchange
		display an E-E picture, record an	the disc.
		essence mark, or add a quick scene
		selection sub clip when there was no
		free sparing area.
Non AV Full	on, limit, off	A command was received to record,	Insert a different disc with enough free
		display an E-E picture, record an	capacity.
		essence mark, or add a quick scene
		selection sub clip when there was no
		free Non-Real-Time space.
No Clip!	on, limit	A playback or search command was	These operations are not possible.
		received for a disc containing no
		recorded clips.
Disc Top!	on	A PREV or reverse high-speed search
		command was received with the disc
		stopped at the top.
Disc End!	on	A NEXT or forward high-speed search
		command was received with the disc
		stopped at the end.
TC EXT!	on	A time code or user bits preset	Try the operation again after setting
		command was received with extended	extended menu item 626 “TC MODE” to
		menu item 626 “TC MODE” set to “ext	“int preset.”
		preset.”	See 8-3-2 “Extended Menu Operations”
REGEN mode!	on	A time code or user bits preset
			(page 120) about how to make this setting.
		command was received with extended
		menu item 626 “TC MODE” set to “int
		regen,” “ext regen,” or “rp188 regen.”
Live Logg!	on, limit	A time code or user bit preset operation	Set extended menu item 258 “LIVE
		was attempted with extended menu item	LOGGING” to “off” before performing the
		258 “LIVE LOGGING” set to “on.”	operation.
			See 8-3-2 “Extended Menu Operations”
			(page 120) about how to make this setting.
REC RUN!	on	A time code or user bits preset	Try the operation again after setting
		command was received with extended	extended menu item 627 “RUN MODE” to
		menu item 627 “RUN MODE” set to “rec	“free run.”
		run.”	See 8-3-2 “Extended Menu Operations”
			(page 120) about how to make this setting.

Troubleshooting and Maintenance 9 Chapter

9-3 Alarms 141