Menu items in the 300s, relating to editing operations

Item number

Item name

Settings

 

 

 

 

301

VAR SPEED RANGE FOR

 

Select the playback speed range when carrying out playback in variable

 

SYNCHRONIZATION

 

speed mode from a remote control unit connected to the REMOTE

 

 

 

connector.

 

 

 

–2~+2: –2 to +2 times normal speed.

 

 

 

wide: –2.20 to +2.20 times normal speed.

 

 

 

 

308

SELECTION OF STD/NON-STD

 

Select the STD or NON-STD mode in accordance with a composite

 

FOR COMPOSITE VIDEO IN

 

video or S-video input.

 

 

 

STD (forced STD): The STD mode is always used (forced STD mode).

 

 

 

N-STD (forced non-STD): Use this setting when the input video signal is

 

 

 

unstable (forced NON-STD mode).

 

 

 

 

 

 

 

Note

 

 

 

 

When

using a VCR with no built-in time base corrector (e.g. a home-use

 

 

 

VHS-system VCR), select N-STD.

 

 

 

 

310

REC INHIBIT

 

Select whether recording is inhibited.

 

 

 

off: Do not inhibit recording.

 

 

 

on: Inhibit recording.

 

 

 

 

311

ANALOG AUDIO EDIT PRESET

 

Select methods for setting the edit presets of the digital audio channels

 

REPLACE FOR CH1

 

CH1 to CH4 of this unit. Make these settings when using an editor (PVE-

 

 

 

500, BVE-600, etc.) or remote control unit without a function to control

312

ANALOG AUDIO EDIT PRESET

 

 

digital audio edit presets.

 

REPLACE FOR CH2

 

 

 

The edit presets of the digital audio channels of this unit are turned on

 

 

 

313

ANALOG AUDIO EDIT PRESET

 

and off according to the specified analog audio presets of the editor or

 

REPLACE FOR CH3

 

remote control unit.

 

 

 

nodef (no definition): No definition

314

ANALOG AUDIO EDIT PRESET

 

 

ch 1 (analog ch1): Follow the edit preset of analog channel 1.

 

REPLACE FOR CH4

 

 

 

ch 2 (analog ch2): Follow the edit preset of analog channel 2.

 

 

 

 

 

 

ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or

 

 

2.

 

 

 

(The default settings for each item are as follows)

 

 

 

311: ch 1 (analog ch1)

 

 

 

312: ch 2 (analog ch2)

 

 

 

313: nodef (no definition)

 

 

 

314: nodef (no definition)

 

 

 

 

317

AUDIO EDIT MODE

 

Select the type of transition for audio editing.

 

 

 

cut (cut edit): Cut editing (Audio is discontinuous at edit points, and

 

 

 

noise may occur during playback.)

 

 

 

cross (cross fade): Cross-fade (Processing time 10ms)

 

 

 

 

320

DIGITAL AUDIO PB PROCESS ON

 

Select the treatment of audio playback at edit points.

 

EDIT POINT

 

cut: Carry out a cut (possibly resulting in audio discontinuities at the edit

 

 

 

point).

 

 

 

fade: Fade out and fade in.

 

 

 

 

329

ANALOG AUDIO EDIT PRESET

 

Select methods for setting the edit presets of the digital audio channels

 

REPLACE FOR CH5

 

CH5 to CH8 of this unit. Make these settings when using an editor (PVE-

 

 

 

500, BVE-600, etc.) or remote control unit without a function to control

330

ANALOG AUDIO EDIT PRESET

 

 

digital audio edit presets.

 

REPLACE FOR CH6

 

 

 

The edit presets of the digital audio channels of this unit are turned on

 

 

 

331

ANALOG AUDIO EDIT PRESET

 

and off according to the specified analog audio presets of the editor or

 

REPLACE FOR CH7

 

remote control unit.

 

 

 

nodef (no definition): No definition

332

ANALOG AUDIO EDIT PRESET

 

 

ch 1 (analog ch1): Follow the edit preset of analog channel 1.

 

REPLACE FOR CH8

 

 

 

ch 2 (analog ch2): Follow the edit preset of analog channel 2.

 

 

 

 

 

 

ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or

 

 

2.

 

 

 

 

 

Menus 8 Chapter

8-3 Extended Menu 111