Menus 8 Chapter
Turning clockwise increases the value, and turning counterclockwise decreases the value.
The F/f buttons can be used.
To return to the factory default setting
Press the RESET button.
4 When all digits are set, press the SET button.
This returns to the NETWORK CONFIG menu.
To cancel a setting
Before pressing the SET button, press the MENU button.
This returns to the NETWORK CONFIG menu, without saving the new setting.
5 Repeat steps 1 to 4 as required, to set the subnet mask and default gateway.
6 In the NETWORK CONFIG menu, press the SET button.
7 When the “NOW SAVING...” message vanishes, power the unit off and then on again with the on/ standby switch.
Setting the communications speed
Set the communications speed (LINK SPEED) and communications method (DUPLEX) to match the network environment.
For details of the operation, see “To change the setting of a menu item” (page 126).
128