Preparations 3 Chapter
aType of time data
Display | Meaning |
|
|
CNT | Counter data |
|
|
TCR | TC reader time code data |
|
|
UBR | TC reader user bits data |
|
|
TCR. | VITC reader time code |
|
|
UBR. | VITC reader user bits data |
|
|
TCG | TC generator time code |
|
|
UBG | TC generator user bits data |
|
|
IN | IN point time data |
|
|
OUT | OUT point time data |
|
|
DUR | Duration between IN point and OUT |
| point |
|
|
Note
If the time data or user’s bits cannot be read correctly, they will be displayed with an asterisk. For example, “T*R”, “U*R”, “T*R.” or “U*R.”.
bTime code reader drop frame mark (for 525 line mode only)
“.”: Indicates drop frame mode
“:”: Indicates
cTime code generator drop frame mark (for 525 line mode only)
“.”: Indicates drop frame mode (factory default setting)
“:”: Indicates
dVITC field mark
“” (blank): Fields 1 and 3 (for 525/60 mode) or fields 1, 3, 5 and 7 (for 625/50 mode)
“* ”: Fields 2 and 4 (for 525/60 mode) or fields 2, 4, 6 and 8 (for 625/50 mode)
eMenu setting states 1)
Display | Description |
|
|
B1 | The current menu settings are the same as |
| the settings in menu bank 1. |
|
|
B2 | The current menu settings are the same as |
| the settings in menu bank 2. |
|
|
B3 | The current menu settings are the same as |
| the settings in menu bank 3. |
|
|
B4 | The current menu settings are the same as |
| the settings in menu bank 4. |
|
|
DF | The current menu settings are the same as |
| the factory defaults. |
|
|
No display | The current menu settings are different from |
| all of the above. |
|
|
1) This is supported from firmware version 1.4.
fOperation mode
The field is divided into two blocks as shown below.
•Block A displays the operation mode.
•Block B displays the servo lock status or playback speed.
AB
Display |
| Operation mode | |
|
|
| |
Block A |
| Block B |
|
|
|
|
|
DISC OUT |
| Disc is not loaded. | |
|
|
| |
LOADING |
| Disc is being loaded. | |
|
|
| |
UNLOADING |
| Disc is being unloaded. | |
|
| ||
STANDBY OFF | Standby off mode | ||
|
|
| |
STOP |
| Stop mode | |
|
|
| |
NEXT |
| Cuing up to the first frame of the | |
|
|
| next clip. |
|
|
| |
PREV |
| Cuing up to the first frame of the | |
|
|
| current clip. |
|
|
| |
F.FWD |
| Fast forward search | |
|
|
| |
F.REV |
| Fast reverse search | |
|
|
| |
PLAY |
| Playback mode (servo unlocked) | |
|
|
| |
PLAY |
| LOCK | Playback mode (servo locked) |
|
|
|
|
REC |
| Record mode (servo unlocked) | |
|
|
| |
REC |
| LOCK | Record mode (servo locked) |
|
|
|
|
JOG |
| STILL | A still picture in jog mode |
|
|
|
|
JOG |
| FWD | Jog mode in forward direction |
|
|
|
|
JOG |
| REV | Jog mode in reverse direction |
|
|
|
|
SHUTTLE |
| STILL | A still picture in shuttle mode |
|
|
|
|
SHUTTLE |
| (Speed) | Shuttle mode |
|
|
|
|
VAR |
| (Speed) | Variable speed mode |
|
|
| |
TOP 0001/xxxx | Cuing up to the first frame of the | ||
|
|
| first clip. |
|
|
| |
END xxxx/xxxx |
| Cuing up to the last frame of the | |
|
|
| last clip. |
|
|
| |
PREROLL |
| Cuing up during thumbnail search | |
|
|
|
|
gPlayback condition mark
One of three channel condition marks is displayed when the ACCESS indicator is lit during any mode except recording. The three channel condition marks indicate the following three stages.
44