2 Use the arrow buttons or the jog dial to select the desired clip.
You can also select clips with the following operations.
Press the PREV or NEXT button: Moves to the previous or next clip.
Press the PREV or NEXT button with the SHIFT button held down: Moves to the first or last clip.
Press the F or f button with the SHIFT button held
down: Switches to the previous or next page. (Does not switch when there is only one page.)
3 With the SHIFT button held down, press the SET button.
The scene selection window appears.
To return to the original screen
Press the RESET button.
4 Press the SET button.
The selected clip is added to the current clip list as a sub clip.
At the same time, the scene selection window closes and you return to the original thumbnail screen.
5 Repeat steps 2 to 4 until you have added all of the desired clips to the current clip list.
You can select the same clip any number of times.
The scene selection window displays thumbnails of the sub clips that have been added to the current clip list. The cursor in the window indicates the position where the next sub clip will be added.
Total duration of sub clips in the current clip list
Cursor (indicates where the next sub clip will be added)
Thumbnails of sub clips already added to the current clip list
To move the cursor in the scene selection window
After carrying out step 3 to display the scene selection window, press the G or g button.
6 When you have finished selecting all the clips you want, save the current clip list to disc.
See
1 With the SUBCLIP button off, and the clip displayed in
To display the desired clip in
Selection Scene 5 Chapter
69 | |
|
|