IntroductionHardware information
Dynamic Parameters
| MC.3110 | MC.3112 | MC.3120 | MC.3122 | MC.3130 | MC.3132 | ||||||
| MC.3111 |
|
| MC.3121 |
|
| MC.3131 |
|
| |||
Test - Samplerate | 1 | MS/s | 1 | MS/s | 10 MS/s | 10 MS/s | 25 MS/s | 25 MS/s | ||||
Testsignal frequency | 90 kHz | 90 kHz | 1 | MHz | 1 | MHz | 1 | MHz | 1 | MHz | ||
SNR (typ) | > 67.5 dB | > 66.9 dB | > 64.9 dB | > 64.9 dB | > 63.1 dB | > 62.4 dB | ||||||
THD (typ) | < | < | < | < | < | < | ||||||
SFDR (typ), excl harm. | > 80.8 dB | > 80.5 dB | > 80.5 dB | > 78.5 dB | > 79.5 dB | > 79.3 dB | ||||||
SINAD (typ) | > 61.5 dB | > 61.4 dB | > 60.5 dB | > 60.5 dB | > 59.8 dB | > 59.4 dB | ||||||
ENOB (based on SINAD) | > 9.9 LSB | > 9.9 LSB | > 9.8 LSB | > 9.8 LSB | > 9.6 LSB | > 9.6 LSB | ||||||
Dynamic parameters are measured at ± 1 V input range (if no other range is stated) and 50 Ohm termination with the samplerate specified in the table. Measured parameters are aver- aged 20 times to get typical values. Test signal is a pure sine wave of the specified frequency with > 99% amplitude. SNR and RMS noise parameters may differ depending on the quality of the used PC. SNR = Signal to Noise Ratio, THD = Total Harmonic Distortion, SFDR = Spurious Free Dynamic Range, SINAD = Signal Noise and Distortion, ENOB = Effective Number of Bits. For a detailed description please see application note 002.
Order information
Order No | Description |
| Order No | Description |
MC3110 | MC.3110 with 8 MSample memory and drivers/SBench 5.x |
| Option: 16 MSample memory instead of 8 MSample standard mem | |
MC3111 | MC.3111 with 8 MSample memory and drivers/SBench 5.x |
| Option: 32 MSample memory instead of 8 MSample standard mem | |
MC3112 | MC.3112 with 8 MSample memory and drivers/SBench 5.x |
| Option: 64 MSample memory instead of 8 MSample standard mem | |
MC3120 | MC.3120 with 8 MSample memory and drivers/SBench 5.x |
| Option: 128 MSample memory instead of 8 MSample standard mem | |
MC3121 | MC.3121 with 8 MSample memory and drivers/SBench 5.x |
| Option: 256 MSample memory instead of 8 MSample standard mem | |
MC3122 | MC.3122 with 8 MSample memory and drivers/SBench 5.x |
| Additional handling costs for later memory upgrade | |
MC3130 | MC.3130 with 8 MSample memory and drivers/SBench 5.x |
|
|
|
MC3131 | MC.3131 with 8 MSample memory and drivers/SBench 5.x |
| Option Multiple Recording: Memory segmentation | |
MC3132 | MC.3132 with 8 MSample memory and drivers/SBench 5.x |
| Option Gated Sampling: Gate signal controls acquisition | |
|
|
| Additional 4 synchronous digital inputs per channel, incl. cable | |
Star Hub: Synchronisation of 2 - 16 boards, one option per system |
|
|
| |
Timestamp option: Extra memory for trigger time |
| DASYLab driver for MC.31xx series | ||
Extra I/O, external connector: 24 DI/O, 4 Analog out, incl. cable |
| VEE driver for MC.31xx series | ||
|
|
| LabVIEW driver for MC.31xx series | |
Synchronisation of 2 - 4 boards, one option per system |
| MATLAB | MATLAB driver for all MI.xxxx, MC.xxxx and MX.xxxx series. | |
Adapter cable: SMB female to BNC male 80 cm |
| Adapter cable: SMB female to BNC female 80 cm | ||
Adapter cable: SMB female to BNC male 200 cm |
| Adapter cable: SMB female to BNC female 200 cm | ||
|
|
|
|
|
(c) Spectrum GmbH | 13 |
