
UsingVoice-Activated Dialing
In addition to Sprint PCS Voice Command (see page 215), you can use a voice dial tag to automatically dial a phone number in your Contacts. (A voice dial tag is a command you record and use to place calls without using the keypad.) Your phone can store up to 30 voice dial tags.
Making a Call UsingVoice-Activated Dialing
▶Press and hold
or
.
Note:To use theVoice Dial function, you musthave storedVoiceTag entries. (See “ProgrammingVoiceTags”below.)
Tip:You can also make a call using
closed. Press and hold the SideVolume key () up or down while in standby mode, and follow the voice prompts.
ProgrammingVoiceTags
Toprogramavoicetag:
1.From standby mode, press Contacts (right softkey).
2. Select a contact and press .
3.Press Options (right softkey) >SetVoiceTag>Add.
4.After you are prompted to say the name you wish to program, wait for the beep and then say the name into your phone’s microphone.
5.Respond to the prompt by repeating the name after the beep. (The display shows “Voice Tag Recorded.”)
Tip: Record voice dial tags in a quietenvironmentand withoutthe aid of an accessory(for example, a headsetor
VoiceServices
Section 2H: Using Your Phone’s Voice Services | 131 |