Sprint Nextel Cell Phone TurningYour Phone On and Off, TurningYourPhoneOn, TurningYourPhoneOff

Models: Cell Phone

1 256
Download 256 pages 16.83 Kb
Page 36
Image 36

TurningYour Phone On and Off

TurningYourPhoneOn

Toturnyourphoneon:

Press .

Once your phone is on, it may display “Looking for service...,” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.

In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for Sprint PCS Service by pressing any key (when your phone is turned on).

Tip:The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.

TurningYourPhoneOff

Toturnyourphoneoff:

Press and hold for two seconds until you see the powering down animation on the display screen.

Your screen remains blank while your phone is off (unless the battery is charging).

20 Section 2A: Your Phone – The Basics

Page 36
Image 36
Sprint Nextel Cell Phone manual TurningYour Phone On and Off, TurningYourPhoneOn, TurningYourPhoneOff, Toturnyourphoneon