![](/images/new-backgrounds/1317472/317472107x1.webp)
To acknowledge the alarm, press F1 to clear the alarm. It will then appear in the alarm history screen. Except for High and Low Water Temperature, and Low Refrigerant Pressure, these alarms are considered fatal and maintenance must be preformed in order to allow the chiller to fully run. Should a compressor or pump turn off from an alarm condition, the remaining will shut down and display FAULT in the status screen for the device.
Once a device has gone offline you will need to contact a licensed professional (electrician or refrigeration sevice company) to bring the device back online.
!CAUTION
Never attempt to service a unit until a qualified electrician has opened and locked out the main disconnect using OSHA 1910.147 standards.
All electrical connections must be done by a qualified electrician.
!WARNING
Disconnect all power to the unit, let the unit cool down, and turn off the water prior to any servicing.
Failure to do so can result in SERIOUS INJURY
OR DEATH!
Page 54 of 86 | SSC Series Central Chilling Stations |