SterlingTEK A0551797 manual Introduction, Necessary Documents

1 General Information

1-1 Introduction

Sterling SSC Series central water chilling stations are available in water-cooled and remote air-cooled designs. They differ only in the condensing media used. The SSC Series units are configured with two independent circuits using multiple compressors for each circuit. This manual lists information for these units.

SSC Series chilling stations may be configured with stainless steel pump tanks for use as reservoirs for chilled water processes. These dual-well models hold hot and cold water before and after it is pumped through the chiller. Tanks have recirculation pump(s) to send return water to the chiller and process pump(s) to pump cooled water directly to process. Standby pumps may be utilized to distribute pump service or to allow uninterrupted chiller operation during pump maintenance.

Properly installed, operated, and maintained SSC Series chilling stations provide many years of reliable operation. To get the most satisfaction from your new chiller, read and follow the instructions in this manual.

1-2 Necessary Documents

The following documents are necessary for the operation, installation, and maintenance of Sterling SSC Series central chillers. Additional copies are available from Sterling.

Familiarize the appropriate personnel with these documents:

þThis manual.

þThe schematic and connection diagram in the control enclosure.

þOperation and installation manuals for accessories and options selected by the customer.

þThe Customer Parts List included in the information packet.

SSC Series Central Chilling Stations Page 7 of 86