2.READY – Indicates that the pump is enabled and ready to run. However, the current number of pumps specified to run does not require this pump to operate. The color code for this indication is yellow.
3.RUNNING – Pump is currently running. The color code for this indication is green.
4.FAULT – A safety on the pump indicates a fault condition and the pump has been deactivated. Once the problem is remedied, the pump will return to a READY state unless it is put in the OFFLINE state. The color code for this indication is red.
Operating Chiller Pumps
To turn on and off the pumps, start from the Main Menu, then:
nPress the Up or Down buttons to highlight either “Chilled Water Pump Tank Configuration”.
nPress ↵
The Pump Enables Screen appears
Figure 13
Pump Enables Screen
Page 66 of 86 | SSC Series Central Chilling Stations |
