SRC-7000 User’s Manual
4.And then you will need to make a decision: to either delete all of the codes for the device, or to go into the device to delete the codes for the keys. If you select a device to delete, you will see a message to confirm your decision. Please choose “Yes” or “No” to confirm your decision.
5.If you go into the device to delete the codes for its keys, you can delete the codes by tapping the soft keys directly.
6.If you intend to delete other codes for a device or key, please repeat step 3~5.
The “Del.Code.” function is similar to the “Delete” (P33) function. However, “Code
3.11 Create a Macro
The “Macro” function enables you to send a series of commands with just one key. The features for the Macro function are as follows:
1.You can save up to 60 commands in one Macro key. You can use any keys except the Device key as your Macro key.
2.You can create delays between two commands.
3.During the Macro transmission, all commands will be shown on the LCD at the same time as they are transmitted.
4.The
3.11.1 Macro
With this function, you can use all the keys (except the Device key and Cycle keys) as Macros. The Macro enables you to send a series of commands with just one touch.
42
