Sunwave Tech SRC-7000 manual Motion, Reset, Menus

Chapter 4 Menus

The Motion Detector will sense any movement and turn on the Display automatically. Use this function to change the sensitivity of the Motion detector (Off/Slow/Medium/Fast).

1.	Use	or	to change the sensitivity of	the Motion
Motion	Detector.
2.	The more sensitive (eg: Fast), the more easily the SRC-
	7000 will turn on its LCD.
3.	You can use this function to conserve battery power (a faster
	setting will decrease amounts of accidental activation).
4.	Press		to save your settings or press		to exit

without saving any changes.

There will be a welcome page when you use the SRC-7000 for the first time or reset it.

Welcome Page 1. Use or to turn the welcome page feature on or off (Enable/Disable).

2.Press to save your settings or press to exit without saving any changes.

Use “Calibrate” to adjust the accuracy of the LCD when the SRC-7000 touch screen is not as responsive as usual.

Calibrate 1. When you are calibrating the LCD, tap where the “X” appears (Please refer to Chapter 2.1 P.17 for detailed information).

	2.	Press		to exit without saving any changes.
	1.	If you want to reset your SRC-7000, please use this function
Reset		to erase all of your settings on your remote.
	2.	After	you select this function, a message will appear to

confirm your decision, if you still want to reset your remote, tap “Yes”. This will reset the SRC-7000 back to the factory defaults.

55