Sunwave Tech manual Load the Codes for the Newly-added Device, How to Set Up Your SRC-7000

Chapter 3 How to Set Up Your SRC-7000

6.7.

6.Please decide the “Device Category” for your device by pressing

the or buttons. Press the to confirm and enter next step.

7.Finally, please decide how you will load the IR remote codes for the device. There are three choices for you: “Pre-code”, “Learning” and “Done”. For more detail please refer to the following sections to get further understanding.

3.1.2 Load the Codes for the Newly-added Device

When adding a new device, you will be asked if you will load the codes for your device. There are two ways to load IR remote codes

for your newly-added device: “ Pre-code” & “ Learning”. Please choose one of these two ways to load the codes. If you don’t want to load any codes for the device, just select “Done” to finish the setting process.

A. Pre-code

SRC-7000 is equipped with a huge pre-programmed code database. With this function you are able to load the remote codes for your device easily. It also enables you to control the device even if you lose your original remote.

When you have successfully added a new device, and want to use the “Pre-code” to load the codes, please choose this item.

23