Sunwave Tech SRC-7000 manual Duplicate

Chapter 4 Menus

4.5 Duplicate

Duplicate	You can connect two SRC-7000s with the Transmit
	Cable (Appendix B P.71) to duplicate the settings on
	one remote and transfer them to another unit.

With this function, you are able to transfer your settings to another SRC-7000 using the Transmit Cable.

1.Connect two SRC-7000s, “A” and “B”, by using the Transmit Cable.

2.If you intend to transfer the settings on the SRC-7000 unit “A” to unit “B”, use the SRC-7000 unit “A” to start the duplication.

3.4.5.

3.Press the button with unit “A” for 2 seconds to enter the “Setup Menu”, and then select and enter “ Duplicate”.

4.On pressing the key, you will see a message to confirm the transfer. If you decide to duplicate these settings, please tap “Yes” then the duplication will start.

5.A message will appear to show the progress of the data transmission and duplication.

59