PROBLEMS | CAUSES | SOLUTIONS |
|
|
|
White streaks come through the holes in | Your generator tank is ejecting scale as it | Rinse the collector (see § descaling your |
the soleplate. | has not been descaled regularly. | steam generator). |
|
|
|
Brown streaks come through the holes in | You are using chemical descaling agents | Never add this type of product in the |
the soleplate and stain the linen. | or additives in the water for ironing. | water tank or in the boiler (see page 5 for |
|
| what water may be used). Contact an |
|
| Approved Service Centre. |
| Fabric fibres have accumulated in the | Clean the soleplate with a |
| holes of the soleplate and are burning. | sponge. |
|
|
|
The soleplate is dirty or brown and may | Your linen is not rinsed sufficiently or you | Ensure linen is rinsed thoroughly to remove |
stain the linen. | have ironed a new garment before | any soap deposits or chemicals on new |
| washing it. | garmentswhichmaybesuckedupbytheiron. |
| You are ironing at too high a temperature. | See our recommendationsregarding |
|
| temperature control setting. |
|
|
|
| You are using starch. | Always spray starch on the reverse side of |
|
| the fabric to be ironed. |
There is no steam or thereis little steam. | The water tank is empty (red light on). | Fill the water tank. |
|
|
|
| The steam output control dial is set at | Increase the steam output (controldial on |
| minimum. | the control panel). |
| The soleplate temperature is set to the | The steam generator operates normally |
| maximum. | but thesteam isveryhotanddry,andhard |
|
| to see. |
Steamcomes out aroundthe collector. | The collector is not tightened correctly. | Tighten the collector. |
|
|
|
| The collector seal is damaged. | Contact an ApprovedServiceCentre. |
|
|
|
| The appliance is faulty. | Do not use the steam generator and |
|
| contact an ApprovedServiceCentre. |
The red “water tank empty” lightis on. | The water tank is empty. | Fill the water tank. |
|
|
|
Steam or water escapes under the | The rinse plug seal is damaged. | Do not use the steam generator and |
appliance. |
| contact an ApprovedServiceCentre. |
|
|
|
The “anti calc” indicatoris lit. | You have not pressed the “Restart” button. | Press the “Restart” button on the control |
|
| panel. |
|
|
|
If you haveany product problems or queriespleasecontact our CustomerRelationsTeamfirst forexperthelp and advice
Environment protection first !
Your appliance contains valuable materials whichcan be recovered or recycled. Leave it at a local civic waste collectionpoint.
If you haveany problemsor queriesplease call our CustomerRelations team first for expert help and advice:
0845 602 1454 - UK
(01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
F
NL
D
GB
I
E
P
DK
S
FIN
N
GR
TR
PL
CZ
SK
H
RUS
UA
HR
RO
SLO
EST
LT
LV
23
