Teledyne 6750 operating instructions Analog Outputs, 4:Electrical Connections to the Model

Installation Model 6750

•Power ConnectionUniversal AC Power Source

•Primary Input Power

CAUTION: POWER IS APPLIED TO THE INSTRUMENT’S CIRCUITRY AS LONG AS THE INSTRUMENT IS CONNECTED TO THE FACILITY POWER SOURCE. THE FACILITY MUST HAVE AN EXTERNAL POWER SWITCH TO REMOVE PRIMARY POWER FROM THE ANALYZER.

•Analog Output Connections

•Alarm Connections

Figure 3-4 shows where the electrical connections are made to the instrument.

3.3.2 Analog Outputs

There are two analog output signal connections. There are two

wires per output with the polarity noted. See “As Built Drawings” in the Appendix. The outputs are non isolated 4-20 mA.

Figure 3-4: Electrical Connections to the Model 6750

Teledyne Analytical Instruments 24