Total Organic Carbon Analyzer

Maintenance

 

 

5.3.3 Master Interface Board (P/N ST13042-1).

The Master Interface Board has no field adjustment. If malfunctioning, replace the module P/N ST13042-1 using the instructions below. See Figure 5-5.

Figure 5-5: Removing the Master Interface Board

To Remove the PC Board:

1.Turn off power.

2.Remove plastic cover.

3.Disconnect connectors.

4.Remove panel.

Note: Depending on the configuration, there may be one or two master interface boards.

Teledyne Analytical Instruments

53

Page 65
Image 65
Teledyne 6750 operating instructions Master Interface Board P/N ST13042-1, Removing the Master Interface Board