To remove a trap receiver from the list of Trap IPs:
•Select “Remove IP address from the trap list”
•Select the IP to be removed and press [ENTER]
To view a list of trap receivers by IP address:
•Select “Print the current trap IP list”
•The interface will display the list of trap receivers. Press [ENTER] to return to the menu.
To save any changes:
•Select “Save changes and exit”
Via Web Management
To add a trap receiver’s IP address via the Web Management
Interface:
•Click on the “Management Control Processor” graphic.
•Click on the “SNMP” tab.
•Enter the IP address of the trap receiver.
•Click the “Add IP” button.
To remove a trap receiver’s IP address via the Web Management Interface:
•Click on the “Management Control Processor” graphic.
•Click on the “SNMP” tab.
•Select the IP address of the trap receiver from the Trap IP list.
•Click the “Delete” button.
8.1.3Downloading the MIB file
The network manager makes virtual connections to the RamSan, which returns information to the manager regarding the device’s status. The agent contains a database, known as the SNMP Management Information Base (MIB), describing these application parameters. The manager uses this database to make requests to the agent and interpret the signals received. The MIB describes a set of statistical and control values defined for hardware nodes on the RamSan.
Via Web Management
To download the RamSan’s MIB file via the Web Management Interface:
Click on the “Management Control Processor” graphic. Click on the “SNMP” tab.
Click the “Get MIB file” button.
| - 96 - |
