Via Text Management
To change the system time via Text Management Interface:
•From the Telnet Main Menu, select “Management setup”
•Select “Set system date/time”
•Select “Set the time”
•Set the time and press [ENTER]
•Select “Set the date”
•Set the date and press [ENTER]
•Select “Save changes and exit”
Figure 4-6: Password Change
4.3 Configuring Ethernet Settings
The RamSan allows system monitoring and configuration through the serial port and the Ethernet port. To access the system’s Ethernet port, the administrator must assign the RamSan an IP address, subnet mask, and possibly a gateway. The administrator may assign the IP address in one of three ways: Static IP, DHCP, or No Ethernet. The default factory setting is DHCP.
For any questions regarding IP assignment values, please consult your network administrator.
4.3.1Configuring Ethernet Settings via Front Panel
To setup the Ethernet via the Front Panel, use the arrow buttons to cycle through the
| - 26 - |
