•Displays a list of the current IP configuration, hostname, IP address, subnet mask, gateway address (if applicable), and hardware Ethernet address.
•To continue setting up the Ethernet configuration
•Shuts down and restarts the Ethernet port using the current IP assignment configuration
•Exits the setup menu.
Show Current Config
Set IP Config
Restart Network
Exit Menu
Use the arrow buttons to scroll up and down through the list. Pressing the “Menu” button returns to the previous menu, and pressing the “Select” button exits the menu system. To continue setting up the Ethernet configuration, select “Set IP Config.”
After selecting “Set IP Config,” you may use the arrow buttons to cycle through:
• Enables you to set a Static static IP address for
the RamSan.
•Sets the IP configuration to
DHCP
•Disables Ethernet
•Returns to the Main Menu without making any changes
DHCP
None
No change
| - 27 - |
