Appendix D – Serial Port Settings
You may connect to the management port with either a
Port Settings
To connect to the RamSan using a serial port connection, use a dumb terminal or a terminal emulation program such as Windows™ HyperTerminal. Set your baud rate to 9600 with 8 data bits, 1 stop bit, no parity, and no flow control.
To connect to the serial port, use the
Default Account
Use the following default account information to access the RamSan through the serial port:
ssd Login: admin
Pin Out
The RamSan serial port has the following pin out settings:
Figure D-0-1: Serial Port Pin Out
- 111 - |