LED Performance Monitoring
If your system is equipped with front panel LEDs, you can also view bandwidth and IOPS:
From the front panel main menu, select
“LED Display”
LED Display
This mode uses the LEDs to display bandwidth or IOPS. To use the LEDs to display bandwidth, select “Display Bandwidth.” To use the LEDs to display IOPS, select “Display IOPS.”
Once you select one of the above options, the display will ask you to “Enable Autoblink.” If you enable autoblink, the top LED will blink (even with constant bandwidth or IOPS).
Display Bandwidth
| - 41 - |
