Thermador P24GE, PC30 Using The Cooktop, Sealed Burners, Control Knobs, Operation Of The Burners

Models: P24GE PC30

1 64
Download 64 pages 47.65 Kb
Page 11
Image 11
Sealed Burners

Section 4: USING THE COOKTOP

Sealed Burners

Sealed Star® Brass

Burner Base

The cooktop features four or six gas surface burners; each rated at 15,000 BTU/HR using natural gas (13,000 BTU/HR using Propane). The burners are sealed to the stainless steel top frame to prevent liquid spills from accumulating below the top surface, making it easier to clean.

On all models, the two left burners have the exclusive ExtraLow feature, the remaining burners are standard. Each burner has its own control knob.

Using The Cooktop

CONTROL KNOBS

The control knobs for two sealed gas burners, one in front and one in the rear, are located directly in front of and below the pair of burners on the control panel.

Setting Indicator

Knob

Standard Burner

Control Knob

The two words above each control knob identifies the burner position. For example, LEFT FRONT, RIGHT FRONT, etc.

OPERATION OF THE

BURNERS

Press in on the knob and turn it counter-clockwise to the HI setting.

The igniter for the selected sealed burner clicks and sparks.

After flame ignition, the igniters stop clicking.

Rotate the knob to any flame setting between HI and LO.

The Blue Burner Signal Light, between the burners, will light when adjacent burners are lit. They will remain on until the burner is turned off.

BTU Output for Standard Burners

HI is equivalent to 15,000 BTU / HR using natural gas (13,000 BTU / HR using Propane).

LO is equivalent to 2,100 BTU / HR.

BTU Output for ExtraLow® Burners

HI is equivalent to 15,000 BTU / HR using natural gas (13,000 BTU / HR using Propane).

LO is equivalent to 3,000 BTU / HR.

XLO is equivalent to 370 BTU / HR.

ExtraLow® Burners

The controls for the two left burners, front and rear, have flame settings even lower than the standard LO settings.

Setting Indicator

ExtraLow®

Range

ExtraLow® Burner

Control Knob

The drawing shows that the control knob has an additional range between the LO and XLO settings. When the knob is set within this range, the flame cycles off and on. By varying the length of time the flame is off and on, the heat is reduced even further to cook delicate foods. For example, these very low settings are suitable for simmering and poaching, melting chocolate and butter, holding cooked foods at temperatures without scorching or burning, etc.

9

Page 11
Image 11
Thermador P24GE, PC30 Using The Cooktop, Sealed Burners, Control Knobs, Operation Of The Burners, ExtraLow Burners