Timex Performance Watch manual Chronograph Mode terminology, Chronograph Mode functions

Chronograph Mode

INDIGLO¨	View performance
night-light	data
To Vertical Mode	Swap upper and
or hold for time	middle lines
Start timing or	Stop or reset the
take a split	chronograph

Chronograph Mode terminology

Chronograph: The chronograph records time segments for the duration of your activity.

Lap: Lap time records the time for one segment of your activity.

Split: Split time records the total elapsed time since the beginning of your current activity.

Taking a split: When you take a split, the chronograph will complete timing one lap and begin timing a new one.

Chronograph Mode functions

Chronograph Mode operates as the main workout data center for your Watch. It can record elapsed time for up to 100 hours. It can also register information for up to 100 laps, including data for speed, pace, and distance (using the GPS-3D Sensor); and average heart rate (using the HR Sensor).

24

NOTE: Press MODE to switch the Watch display to any other mode while the chronograph continues to run. The stopwatch icon will appear to indicate the chronograph is still functioning.

TO OPERATE CHRONOGRAPH MODE MANUALLY

1.Press MODE until Chronograph Mode appears.

2.Press START/SPLIT to begin timing.

3.Press START/SPLIT again to take a split and automatically begin timing a new lap.

The Watch stores lap and split information and displays average statistics for the lap if you are using the Fitness Sensors.

4.Press MODE to immediately display new lap information

OR

Wait for a few seconds and the Watch will automatically begin to display data for a new lap.

5.Press STOP/RESET to stop timing when you reach the end of your activity.

6.Press START/SPLIT to continue timing.

OR

Press and hold STOP/RESET to reset the chronograph display to zero.

25