Installation of Indoor Unit | Toshiba MMU-AP0071YH manual

3 INSTALLATION OF INDOOR UNIT

Ceiling opening and installation of hanging bolts

•Considering pipe/wire connecting work inside the ceiling after the indoor unit has been hanged, select an installation place and determine piping direction.

•After installation place of the indoor unit has been determined, open the installation hole on the ceiling and install the hanging bolts.

•For the ceiling opening size and the hanging bolt pitch, refer to the external view and the attached installation pattern.

•If the ceiling has been already set up, draw the drain pipe, refrigerant pipe, indoor/outdoor inter-unit cable, cable for central control system, and remote controller cable up to the position where pipes and cables are to be connected before hanging the indoor unit.

Please procure the hanging bolts and nuts for installation of the indoor unit at local site.

Hanging bolt	M10 or W3/8	4 pieces

Nut	M10 or W3/8	12 pieces

Flat washer	M10	8 pieces

[How to use the attached installation pattern]

The installation pattern is attached inside of the package cap.

<In case of existing ceiling>

Use the installation pattern for positioning of the ceiling opening hole and the hanging bolt.

<In case of new ceiling>

Use the installation pattern for positioning of the opening hole when setting up a new ceiling.

•Install the indoor unit after installation of the hanging bolts.

•Using the attached installation pattern fixing screws (M5 × 20L: 4 pieces), attach the installation pattern to the indoor unit. (Screwing to installation brackets of the ceiling panel)

•When setting up the ceiling, open a hole along the outside dimension of the installation pattern.

Pattern sheet

Ceiling panel fixing screw (Use the attached screws.)

Installation of hanging bolts

Use M10 hanging bolts (4 pcs, to be local procure).

Matching to the existing structure, set pitch according to size in the unit external view as shown below.

	New concrete slab		Steel flame structure		Existing concrete slab
Install the bolts with insert brackets or anchor			Use existing angles or install new		Use a hole-in anchors, hole-in
bolts.			support angles.		plugs, or a hole-in bolts.
		Reinforcing	Hanging bolt
		Reinforcing
		steel
		Anchor bolt
(Blade type	(Slide type	(Pipe hanging
bracket)	bracket)	anchor bolt)	Hanging bolt	Support angle
			Hanging bolt	Support angle

Installation of remote controller (Sold separately)

For installation of the wired remote controller, follow the Installation Manual attached with the remote controller. For installation of the wireless remote controller, follow to the Installation Manual attached to the remote controller.

•Do not put the remote controller on the place where is exposed to direct sunlight or near a stove, etc.

•Operate the remote controller, check the indoor unit surely receives the signal, and then install the remote controller. (Wireless type)

•Install the remote controller 1m apart from the devices such as TV or stereo. (Image may be disturbed or noise may be output.) (Wireless type)

MMU-AP0071YH specifications

The Toshiba MMU-AP0071YH is an advanced motion control solution tailored for precise applications in various sectors, including industrial automation and robotics. This model exemplifies Toshiba's commitment to innovation and reliability, integrating cutting-edge technologies to streamline processes and enhance system performance.

One of the standout features of the MMU-AP0071YH is its superior motion control capabilities. It offers advanced servo control technology, ensuring highly accurate positioning and smooth motion transitions. This precision is critical for applications where even minor deviations can impact the overall system performance, such as in CNC machinery and robotic arms.

The MMU-AP0071YH is designed with flexibility in mind. It supports a wide range of interfaces, including EtherCAT, CANopen, and RS-232, allowing seamless integration with various systems and devices. This versatility facilitates easy implementation in existing setups, enabling manufacturers to upgrade their equipment without extensive modifications.

Another significant characteristic of the MMU-AP0071YH is its robust safety features. Safety is paramount in industrial environments, and Toshiba has incorporated multiple safety functions, such as Safe Torque Off (STO) and Safe Stop 1 (SS1). These features ensure the system can detect faults and respond appropriately to prevent accidents and protect both the machinery and operators.

Furthermore, the device is built to withstand demanding operational conditions. The MMU-AP0071YH is characterized by a compact and sturdy design, which is essential for environments that require high durability. The quality of the materials used in its construction also plays a vital role in its ability to operate effectively under various conditions.

In addition to its technical capabilities, the MMU-AP0071YH features user-friendly software tools that allow operators to configure, monitor, and manage motion tasks effortlessly. The user interface is intuitive, enabling engineers and technicians to access critical parameters quickly, thus optimizing performance and reducing downtime.

Overall, the Toshiba MMU-AP0071YH combines precision, versatility, and safety, making it a compelling choice for industries seeking reliable motion control solutions. Its innovative technology and robust design not only enhance operational efficiency but also contribute to the long-term sustainability of various manufacturing processes.

Toshiba MMU-AP0071YH Installation of Indoor Unit, How to use the attached installation pattern

Models: MMU-AP0071YH