Installation of indoor unit

CAUTION

This unit is incorporated with drain pump and float switch. Never incline the main unit. Otherwise, malfunction of the float switch may be caused resulting in water leakage.

•Attach the nut (M10 or W3/8: Procured locally) and the attached washer (Ø34mm) to the hanging bolt.

•Adjust nut position (lower side) so that clearance between (lower side) and the lower side of ceiling board is 137mm.

•Hang up the main unit by hanging nut of hanging bolt to T groove of hanging bracket of the indoor unit.

•Using the level vial, etc., check the horizontal level of the indoor unit.

•Using the installation pattern, check and adjust the positional relation between the indoor unit and ceiling opening hole, and hanging-up height of the indoor unit.

Hanging bolt	(1)
Hanging bolt	M10 flat washer
(W3/8 or M10)	(Accessory)
Nut	(2)
(W3/8 or M10)	(2)
	M10 flat washer
Nut	(Accessory)
(W3/8 or M10)

(1)Required those other than M10 flat washer at site.

(2)To prevent falling-off of bolt (safety), be sure to set it just under the hanging bracket as shown in the figure.

137mm

Hanging bolt

Nut (Upper side)

Washer

(Upper side)

(Hanging bracket main unit)

Washer (Lower side)

Nuts (Lower side)

Lower surface of ceiling

•The used screws when attaching the installation pattern are used again to install the panel.

•Using the ceiling panel fixing screws, fix the installation pattern under surface of the indoor unit.

Opening part

• Fit the ceiling opening size to outside of the installation pattern.

(Ceiling opening dimension)

Installation pattern

Lower side of	Lower surface
installation pattern	of ceiling

695

110

Outline of indoor unit

P0151, P0181 : 1160

P0241 : 1360

(Ceiling opening dimension)

• Match the bottom surface of ceiling and lower side of installation pattern on the same level.

Indoor unit		Indoor unit
		Indoor unit
Lower side of		Protruding : 0mm or more
installation pattern	Lower surface	Protruding : 0mm or more
Match on the same level.	of ceiling
Match on the same level.

Indoor unit

Drawing : 3mm or less

•Fix the indoor unit securely by tightening nut at upper side.

Level vial

Fix securely

REQUIREMENT

•Using a level vial, etc., confirm the horizontal level of the indoor unit.

•Tighten the nut sufficiently, and fix it securely.

Installation of ceiling panel (Sold separately)

Install the ceiling panel according to Installation Manual after piping/wiring work has completed.

Check that installation of indoor unit and ceiling opening part is correct, and then install it.

REQUIREMENT

Connect the connecting sections of ceiling panel and ceiling surface, and the ceiling panel and indoor unit closely.

If there is clearance, air leakage generates resulting in dewing or water leakage.

MMU-AP0071YH specifications

The Toshiba MMU-AP0071YH is an advanced motion control solution tailored for precise applications in various sectors, including industrial automation and robotics. This model exemplifies Toshiba's commitment to innovation and reliability, integrating cutting-edge technologies to streamline processes and enhance system performance.

One of the standout features of the MMU-AP0071YH is its superior motion control capabilities. It offers advanced servo control technology, ensuring highly accurate positioning and smooth motion transitions. This precision is critical for applications where even minor deviations can impact the overall system performance, such as in CNC machinery and robotic arms.

The MMU-AP0071YH is designed with flexibility in mind. It supports a wide range of interfaces, including EtherCAT, CANopen, and RS-232, allowing seamless integration with various systems and devices. This versatility facilitates easy implementation in existing setups, enabling manufacturers to upgrade their equipment without extensive modifications.

Another significant characteristic of the MMU-AP0071YH is its robust safety features. Safety is paramount in industrial environments, and Toshiba has incorporated multiple safety functions, such as Safe Torque Off (STO) and Safe Stop 1 (SS1). These features ensure the system can detect faults and respond appropriately to prevent accidents and protect both the machinery and operators.

Furthermore, the device is built to withstand demanding operational conditions. The MMU-AP0071YH is characterized by a compact and sturdy design, which is essential for environments that require high durability. The quality of the materials used in its construction also plays a vital role in its ability to operate effectively under various conditions.

In addition to its technical capabilities, the MMU-AP0071YH features user-friendly software tools that allow operators to configure, monitor, and manage motion tasks effortlessly. The user interface is intuitive, enabling engineers and technicians to access critical parameters quickly, thus optimizing performance and reducing downtime.

Overall, the Toshiba MMU-AP0071YH combines precision, versatility, and safety, making it a compelling choice for industries seeking reliable motion control solutions. Its innovative technology and robust design not only enhance operational efficiency but also contribute to the long-term sustainability of various manufacturing processes.

Toshiba MMU-AP0071YH Installation of indoor unit, Installation of ceiling panel Sold separately

Models: MMU-AP0071YH