Power supply specifications

Power supply cord and communication wires are procured locally.

For the power supply specifications, follow to the table below. If capacity is little, it is dangerous because overheat or seizure may be caused.

For specifications of the power capacity of the outdoor unit and the power supply wires, refer to the Installation Manual attached to the outdoor unit.

	Power supply		220–240V ~ 50Hz
	Power supply		220V ~ 60Hz
Indoor unit power supply (*1)	Power supply switch/Earth leakage breaker or power supply wiring/fuse rating for
	indoor units should be selected by the accummulated total current values of the indoor units.

	Power supply wiring	20m or less	Twist wire : 2.0 mm²

		50m or less	Twist wire : 3.5 mm²
		50m or less	Twist wire : 3.5 mm²

		Q’ty	2
	Indoor/Outdoor inter-unit wiring (*2)	Wire size	(Up to 1000m) Twist wire : 1.25 mm²
		Wire size	(Up to 2000m) Twist wire : 2.00 mm²
			(Up to 2000m) Twist wire : 2.00 mm²
Communication line		Q’ty	2
	Central control line wiring (*3)
	Central control line wiring (*3)	Wire size	(Up to 1000m) Twist wire : 1.25 mm²
		Wire size	(Up to 2000m) Twist wire : 2.00 mm²
			(Up to 2000m) Twist wire : 2.00 mm²

	Remote controller wiring (*4)	Q’ty	2

		Wire size	Twist wire : 0.5 to 2.0 mm²
		Wire size	Twist wire : 0.5 to 2.0 mm²

Indoor unit power supply

(*1)

•For the power supply of the indoor unit, prepare the exclusive power supply separated from that of the outdoor unit.

•Arrange the power supply, earth leakage breaker, and main switch of the indoor unit connected to the same outdoor unit so that they are commonly used.

•Power supply cord specification : Cable 3-core 2.5mm², in conformity with Design 60245 IEC 57.

Indoor/Outdoor inter-unit wiring, Central controller wiring

(*2) (*3)

•2-core with polarity wires are used for the Indoor/Outdoor inter-unit wiring and Central controller wiring.

•To prevent noise trouble, use 2-core shield wire.

•The length of the communication line means the total length of the inter-unit wire length between indoor and outdoor units added with the central control system wire length.

Remote controller wiring

(*4)

•2-core with non-polarity wire is used for wiring of the remote controller wiring and group remote controllers wiring.

Remote controller wiring, remote	Twist wire: 0.5mm2	to 2.0mm2 × 2
controller inter-unit wiring	Twist wire: 0.5mm2	to 2.0mm2 × 2
controller inter-unit wiring

Total wire length of remote controller	In case of wired type only	Up to 500m
wiring and remote controller inter-unit
wiring and remote controller inter-unit	In case of wireless type included	Up to 400m
wiring = L + L1 + L2 + … Ln	In case of wireless type included	Up to 400m

Total wire length of remote controller inter-unit wiring = L1 + L2 + … Ln		Up to 200m

CAUTION

The remote controller wire (Communication line) and AC220–240V wires cannot be parallel to contact each other and cannot be stored in the same conduits. If doing so, a trouble may be caused on the control system due to noise, etc.

Remote controller wiring

Indoor unit		Indoor unit		Indoor unit		Indoor unit

	L1		L2		Ln
Remote	Remote controller inter-unit wiring				(Max. 8 units)
controller	Remote controller inter-unit wiring
controller

MMU-AP0071YH specifications

The Toshiba MMU-AP0071YH is an advanced motion control solution tailored for precise applications in various sectors, including industrial automation and robotics. This model exemplifies Toshiba's commitment to innovation and reliability, integrating cutting-edge technologies to streamline processes and enhance system performance.

One of the standout features of the MMU-AP0071YH is its superior motion control capabilities. It offers advanced servo control technology, ensuring highly accurate positioning and smooth motion transitions. This precision is critical for applications where even minor deviations can impact the overall system performance, such as in CNC machinery and robotic arms.

The MMU-AP0071YH is designed with flexibility in mind. It supports a wide range of interfaces, including EtherCAT, CANopen, and RS-232, allowing seamless integration with various systems and devices. This versatility facilitates easy implementation in existing setups, enabling manufacturers to upgrade their equipment without extensive modifications.

Another significant characteristic of the MMU-AP0071YH is its robust safety features. Safety is paramount in industrial environments, and Toshiba has incorporated multiple safety functions, such as Safe Torque Off (STO) and Safe Stop 1 (SS1). These features ensure the system can detect faults and respond appropriately to prevent accidents and protect both the machinery and operators.

Furthermore, the device is built to withstand demanding operational conditions. The MMU-AP0071YH is characterized by a compact and sturdy design, which is essential for environments that require high durability. The quality of the materials used in its construction also plays a vital role in its ability to operate effectively under various conditions.

In addition to its technical capabilities, the MMU-AP0071YH features user-friendly software tools that allow operators to configure, monitor, and manage motion tasks effortlessly. The user interface is intuitive, enabling engineers and technicians to access critical parameters quickly, thus optimizing performance and reducing downtime.

Overall, the Toshiba MMU-AP0071YH combines precision, versatility, and safety, making it a compelling choice for industries seeking reliable motion control solutions. Its innovative technology and robust design not only enhance operational efficiency but also contribute to the long-term sustainability of various manufacturing processes.

Toshiba MMU-AP0071YH installation manual Power supply specifications, Indoor unit power supply

Models: MMU-AP0071YH