Toshiba RAV-SM1603ATZ-E, RAV-SM1603DT-A 118, Function selection item No. DN list, Contents

Function selection item No. (DN) list

DN	Item			Contents	At shipment from factory
		0000: None		0001: 150H
01	Filter sign lighting time	0002: 2500H		0003: 5000H	According to type
		0004: 10000H		0005: Clogging sensor used
03	Central control address	0001: No.1 unit	to	0064: No.64 unit	0099: Undecided
		0099: Undecided
		0000: No shift		0001: +1°C	0002: +2°C
06	Heating suction temp. shift	0002: +2°C	to	0010: +10°C
					(Floor type 0000: 0°C)
				(Up to +6 is recommended.)
10	Type	0000: (1-way air discharge cassette)			According to model type
		0001: (4-way air discharge cassette) to 0037
11	Indoor unit capacity	0000: Undecided		0001 to 0034	According to capacity type
12	Line address	0001: No.1 unit	to	0030: No.30 unit	0099: Undecided
13	Indoor unit address	0001: No.1 unit	to	0064: No.64 unit	0099: Undecided
14	Group address	0000: Individual		0001: Master unit in group	0099: Undecided
		0002: Follower unit in group
	In automatic cooling/heating, temp.	0000: 0 deg	to	0010: 10 deg	0003: 3 deg
1E	width of cool → heat, heat →	(Cool/heat are reversed with ± (Data value) /
					(Ts±1.5)
	cool mode selection control point	2 against the set temperature)
28	Automatic reset of power failure	0000: None		0001: Provided	0000: None
2A	Selection of option / error input (CN70)	0000: Filter input		0001: Alarm input	0002: Humidifier
		0002: Humidifier input		(Air cleaner, etc.)
2b	Selection of thermostat output	0000: Indoor thermostat ON			0000: Thermostat ON
	(T10 ƒ )	0001: ON receiving output of outdoor compressor
31	Fan (Single operation)	0000: Impossible		0001: Possible	0000: Impossible
32	Sensor selection	0000: Body TA sensor		0001: Remote controller sensor	0000: Body sensor
		0000: No control
	Humidifier control	0001: Humidifier + Vaporizing type (Pump ON)			0003: Humidifier ON
40	(+Drain pump control)	0002: Humidifier + Supersonic type
					Pump OFF
	(This function is not provided.)	(Pump ON when specified time elapsed)
		0003: Humidifier + Natural drain type (Pump OFF)
60	Timer setting (Wired remote controller)	0000: Operable		0001: Operation prohibited	0000: Operable
C2	Current demand X% to outdoor unit	0050: 50%	to	0100: 100%	0075: 75%
D0	Existence of remote controller save	0000: Invalid (Impossible)		0001: Valid (Possible)	0001: Valid (Possible)
	function

∗Restriction ratio setting for save operation (DN code No. [C2]) can be set/changed from the normal DN setup (Detail DN setup).

– 118 –