Toshiba RAV-SM2804AT8Z-E, RAV-SM2244AT7 Detachments, 112, RAV-SM224, RAV-SM280 series, Attachment

14. DETACHMENTS

14-1. Outdoor Unit

RAV-SM224, RAV-SM280 series

No.	Part name	Procedure	Remarks
1	Common
		WARNING
	procedure		Service panel

Stop operation of the air conditioner and turn off breaker switch.

CAUTION

Ensure wearing of gloves when performing any work in order to avoid injury from parts, etc.

1.Detachment

1)Remove the service panel. (Hexagonal screws Ø4 × 10, 3 pcs.)

•Remove the screws and then pull service panel downward to remove.

2)Remove the power supply cable and the indoor/ outdoor connecting wire from the cord clamp and the terminal.

3)Remove the top plate.

(Hexagonal screws Ø4 × 10, 6 pcs.)

2.Attachment

1) Attach the top plate.	Top plate
(Hexagonal screws Ø4 × 10, 6 pcs.)

2)Connect the power supply cable and the indoor/ outdoor connecting wire to the terminal and then

fix with the cord clamp.

CAUTION

The power supply cable and the indoor/outdoor connecting wire must be affixed along the crossover pipe using a commercially available bundling band so that they do not make contact with the compressor,

gas valve, gas pipe and discharge pipe.

3)Attach the front panel.

(Hexagonal screws Ø4 ×10, 3 pcs.)

2 Discharge	1. Detachment		Setting moment
port cabinet	1)	Carry out the operation in 1. of Q above.
			Upper end plate
(upper)	2)	Remove screws for the discharge port cabinet and	of heat exchanger
		the inverter assembly. (ST1T Ø4 × 8, 2 pcs.)
	3)	Remove screws for the discharge port cabinet and	Discharge port
		the discharge cabinet.	cabinet (upper)
		(Hexagonal screw Ø4 × 10, 2 pcs.)

4) Remove screw for the discharge cabinet and heat exchanger. (ST1T Ø4 × 8, 1 pc.)

5) Remove screw for the discharge port cabinet and the fin guard. (Hexagonal screw Ø4 × 10, 1 pc.)

2. Attachment
1)	Place upper left side of discharge cabinet on
			Discharge
	upper side of end board of heat exchanger and fix
			port cabine
	with a screw. (ST1T Ø4 × 8, 1 pc.)
2)	Mount other removed screws into original positions.
		Heat exchanger

– 112 –