Toshiba RAV-SM2804AT8Z-E, RAV-SM2804AT8ZG-E 123, 13Fan guard 1. Detachment, Attachment

No. Part name Procedure Remarks

13Fan guard 1. Detachment

1)Carry out work of item 1. of Q and 1. of S above.

				Remover screw
			CAUTION
				(2 pcs.)
	To prevent scratches to the product, carry out the
	work on cardboard, cloth, etc.
2)		Remove the discharge port cabinet and place the
		fan guard side facing upwards.		Discharge port cabinet
3)		Remove the fixing screws for the fan guard.
		(Hexagonal screws Ø4 × 10, 2 pcs.)
4)		Remove the discharge port cabinet and then put on
		it so that the fan guard side faces downward.
5)		Remove the screws fixing the bellmouth.
		(ST1T Ø4 × 8, 2 pcs.)		Bellmouth
6)		Remove bellmouth.
7)		Press and remove hooking claw of fan guard with a
		flat screwdriver.		Remove screw (2 pcs.)
2. Attachment				Bellmouth

1) Press the projection on the upper side of the fan guard into the hole of the discharge cabinet and then push in the hooking claws.

Fix the claws by using your hands to press the hooking claws (5 positions).

		Discharge port cabinet
	CAUTION	Flat
		screwdriver Fan guard
Check that all the hooking claws are fixed at the
specified positions.

2) After mounting, fix the fan guard with screws. (Hexagonal screws Ø4 × 10, 2 pcs.)

3)Attach and mount the claws (3 positions) on the upper side of the bellmouth in the square hole of

the discharge cabinet.	Hooking claw
4) After mounting, fix with a screw.
(ST1T Ø4 × 8, 2 pcs.)	Discharge port cabinet

Square hole (3 positions)

Bellmouth

Claw (3 positions)

– 123 –