Troubleshooting
Real Time Clock
ProblemProcedure
The following message is Displayed on the screen:
RTC battery is low or CMOS checksum is inconsistent. Press [F1] key to set Date/Time.
The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps:
1.Switch on your computer while pressing the Esc key.
2.The BIOS Setup screen is displayed.
3.Press the F1 key - the BIOS setup application will load.
4.Set the date in the System Date field.
5.Set the time in the System Time field.
6.Press the END key - a confirmation message will be displayed.
7.Press the Y key - the BIOS setup application will end and the computer will restart.
Password
ProblemProcedure
Cannot enter password Please refer to the TOSHIBA Password Utility section in Chapter 6, Power and
Keyboard
Keyboard problems can be caused by the setup and configuration of the computer - please refer to Chapter 5, The Keyboard for further information.
Problem | Procedure |
Some letter keys | Check that the numeric keypad overlay is not |
produce numbers | activated - press the FN + F11 hot key and try |
| typing again. |
|
|
Output to screen is | Please refer to your software's documentation to |
garbled | ensure that its is not remapping the keyboard in |
| any way (remapping involves changing or |
| reassigning the function of each key). |
| If you are still unable to use the keyboard, you |
| should contact your reseller, dealer or service |
| provider. |
|
|
User’s Manual |
