Hardware, Utilities and Options
■A connected eSATA device may not be recognized if it is connected to the computer's eSATA/USB combo port while the computer is in Sleep Mode or Hibernation Mode. If this occurs, disconnect the eSATA device and then reconnect the device while the computer is turned on.
■If you connect an eSATA device after the computer has already been turned on, it will take about ten seconds for it to be recognized by the computer.
Do not attempt to disconnect and reconnect the drive before this period has elapsed.
Disconnecting an eSATA device
When you have finished using an eSATA device, you can follow the procedures below in order to disconnect it:
1.Wait for the indicator light of an eSATA device to go out to make sure all activity has stopped.
If you disconnect an eSATA device or turn off the power while the computer is accessing the drive you may lose data or damage an eSATA device or the drive.
2.Click the Safely Remove Hardware icon on the Windows Taskbar.
3.Click an eSATA device that you want to remove.
4.Carefully pull an eSATA device's eSATA/USB combo connector out from within the computer's eSATA/USB combo port.
TOSHIBA Express Port Replicator
In addition to the ports available on the computer, the TOSHIBA Express Port Replicator provides a DVI port. The TOSHIBA Express Port Replicator connects directly to the docking interface on the underside of the computer. The AC adaptor connects the TOSHIBA Express Port Replicator to a power source.
The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding
■You must connect the AC adaptor before you connect to a TOSHIBA Express Port Replicator.
■When a TOSHIBA Express Port Replicator is connected to the computer, you can not use the following computer’s ports: LAN jack, DC IN 15V jack and External monitor port.
■When connecting an AC Adaptor to the TOSHIBA Express Port Replicator, use only the AC Adaptor included with TOSHIBA Express Port Replicator. Do not use the computer’s AC Adaptor.
User’s Manual |
