User’s Manual 3-24
Hardware, Utilities and Options
5. Loosen the two screws securing the memory module cover in place -
please note that this screw is attached to the cover in order to prevent it
from being lost.
6. Slide your fingernail or a thin object under the cover and lift it off.
Figure 3-7 Removing the memory module cover
7. Align the notch of the memory module with that of the memory slot and
gently insert the module into the slot at about a 45 degree angle before
holding it down until the latches on either side snap into place.
Figure 3-8 Seating the memory module
Use a point size 0 Phillips screwdriver.
Screws
Memory
module cover
Slot B
Slot A Notch
■Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause computer damage and fire, possibly resulting in
serious injury.
■Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.