Troubleshooting
Bluetooth
For further information on Bluetooth wireless communication, please refer to Chapter 4, Operating Basics.
Problem | Procedure |
|
|
Cannot access | Check to ensure the computer's Wireless |
Bluetooth device | Communication Switch is set to on. |
|
|
| Check to ensure the Bluetooth Manager |
| application is running on the computer and that |
| power to the external Bluetooth device is turned |
| on. |
|
|
| Check to ensure that no optional Bluetooth |
| Adaptor is installed in the computer - the |
| Bluetooth hardware cannot operate |
| simultaneously with another Bluetooth controller. |
| If you are still unable to resolve the problem, |
| contact your reseller, dealer or service provider. |
|
|
Recovery Media
ProblemProcedure
The following message appears when executing Recovery Media Creator.
"The Recovery
Media Creator can not be launched because there is no recovery partition."
You will see this message if you have previously chosen to remove the partition and are trying to create "Recovery Media".
When there is no recovery partition, the Recovery Media Creator cannot make Recovery Media.
However, if you have already created a "Recovery Media", you can use it to restore the recovery partition.
Simply follow the instructions in Restoring the
You will be directed to select "Restore Original Factory Image" from the
If you have not created "Recovery Media", please contact TOSHIBA support for assistance.
User’s Manual |
